44 General information
ICNIRP standard for electromagnetic energy exposure.
Connecting to a switchboard
This product is intended for use within Singapore for connection to the public telephone
network.
Inserting a pause
With some switchboards, after dialling the access code you may have to wait for a moment
while the switchboard picks up an outside line so you will need to enter a pause in the
dialling sequence.
Press and hold # to insert a pause (P) before entering the telephone number.
You may also need to enter a pause when storing international numbers or charge card
numbers.
Recall
You may need to use the recall function if you are connected to a switchboard/PABX
(Private Automatic Branch Exchange), contact your PABX supplier for further information.
To Next Page
Loading...
