20 Phonebook
To enter a space press 1
Press to delete a character or press and hold to delete all characters.
4.4 Character map
Use the keypad to enter names and characters.
Key Assigned characters and symbols
1
Space 1 - < > *
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
7
P Q R S 7
8
T U V 8 ?
9
W X Y Z 9
0
0 - / \ # +
4.5 Enter a pause
If your D10 is connected to a switchboard, you may need to enter a pause in a stored
number. This gives the switchboard time to get an outside line. A pause is normally stored
after the switchboard access code (e.g. 9)
1. When storing a number, press and hold until the display shows
P.
You can then
continue storing the phone number.
4.6 View an entry
In standby:
1. Press
d
.
2. Enter the rst letter of the name to search alphabetically then scroll
u
or
d
to the
exact entry. The name is displayed.
3. Press to display the number. If there are more than 12 digits, press again to
see the rest of the number.
4. Press > to return to standby.
To Next Page
Loading...
Need help?
General
