35Advanced settings
2. Scroll
d
to
REGISTRATION
and press m.
3.
SELECT BASE
is displayed. Press m.
The available bases are displayed with the current base number flashing.
4. Enter the number of the base you want – 1,2,3 or 4.
When the base is found you hear a beep. If not found, the display shows
UNREGISTERED
.
8.8 Unregister a handset
Use one handset to delete another. You cannot delete the handset that you are using.
1. Press m and scroll
d
to
ADVANCED SET
and press m.
2. Scroll
d
to
UNREGISTER
and press m.
3. Enter the 4 digit master PIN and press m.
Display shows the rst registered handset number.
4. Scroll
u
or
d
to select the handset you want to delete and press m.
UNREGISTERED
is displayed on the handset screen.
8.9 PIN
The 4-digit master PIN is used when registering or unregistering a handset and when
changing some settings on your D10. The default setting is 0000. You can change this PIN
for more security.
1. Press m, scroll
d
to
ADVANCED SET
and press m.
2. Scroll
d
to
PIN
. Press m.
3. Enter the current 4 digit master PIN and press m. (Default setting 0000).
4. Enter the new PIN and press m.
5. Press > to return to standby.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
8.10 Reset
This will reset your D10 to its default settings.
1. Press m, scroll
d
to
ADVANCED SET
and press m.
2. Scroll
d
to
RESET UNIT
. Press m.
3.
CONFIRM?
is displayed. Press m.
NOTE
Entries stored in the phonebook is retained. After reset, depending on your country, the
welcome mode setting may be shown on the handset display.
To Next Page
Loading...
Need help?
General
