Motorola D10 SERIES - Default Settings; Auto Prefix

36 Advanced settings
8.11 Default settings
Handset name HANDSET
Key tone On
Auto pick up On
First ring On
Auto hang up On
Ringer melody Melody 1
Ringer volume High
Earpiece volume 3
Phonebook Unchanged
Call list Empty
Redial list Empty
Master PIN 0000
Keypad lock O
Clock 00:00
Alarm O
Dial mode Tone
8.12 Auto prex
You can set the D10 to detect a dialling number and replace it with another number. The
number to be detected can be up to 5 digits long. It can be replaced with a number up to
10 digits.
1. Press m, scroll
d
to ADVANCED SET and press m.
2. Scroll
d
to PREFIX . Press m.
3. DETECT DIGIT is displayed. Press m.
4. Enter the number you want to be detected and press m.
5. Scroll to PREFIX NUM . and press m.
6. Enter the number you want it replaced with and press m.
7. Press > to return to standby.