Motorola D10 SERIES User Manual

45Wall mounting
11. Wall mounting
IMPORTANT
Before you wall-mount your D10, check that you are not drilling into any hidden wiring or
pipes.
Before you drill, make sure the power and telephone line cables will reach the sockets.
1. Use the following templates to mark the drilling locations.
• To wall-mount the base, drill two holes in the wall 4.5cm apart horizontally using an
8mm drill bit.
• To wall-mount the charger, drill two holes in the wall 3.2cm apart horizontally using an
8mm drill bit.

Motorola D10 SERIES Specifications

General

Brand	Motorola
Model	D10 SERIES
Category	Cordless Telephone
Language	English