Installation
High-Definition DVR DCX3510-M tInstallation Manual 22
365-095-17066-x.1
Connecting an A/V Receiver — Audio
There are several options available for audio connections to the A/V receiver:
x Digital audio (OPTICAL S/PDIF)
x Stereo audio (AUDIO L and R)
If the A/V receiver supports it, the
optical S/PDIF digital audio output may be used in
place of the stereo audio outputs (
audio L and R). These outputs offer a higher level of
audio quality, including support for Dolby Digital audio.
x Digital audio optical (S/PDIF)—Connect the optical cable to the digital audio
OPTICAL connector on the DCX set-top and the optical connector on the A/V
receiver.
x Stereo audio—Connect the stereo audio cable to the AUDIO L and R connectors on
the DCX set-top and the AUDIO L and AUDIO R connectors on the A/V receiver.
For information on configuring the DCX set-top settings, see Configuring the User
Settings.
To Next Page
Loading...
