Configuring the User Settings
High-Definition DVR DCX3510-M tInstallation Manual 33
365-095-17066-x.1
User Settings Menu Main Screen
To configure the DCX3510-M settings on the main User Settings menu screen, first
power off the DCX3510-M using either the remote control or the Power button and then
press the MENU key on the remote control. If the TV is on, the on-screen User Settings
menu lists the DCX3510-M settings that can be adjusted.
If no HDMI device is connected to the DCX3510-M, the default User Settings menu
appears as follows:
Figure 12: Default User Settings Menu—No HDMI Connection
If the DCX3510-M is connected via HDMI to a display device such as a television, the
default User Settings menu is updated to reflect this information. The YPbPr Output
menu option is replaced with the HDMI/YPbPr Output menu option as follows.
To Next Page
Loading...
Need help?
General
