Calling the Last Number Dialed
1. Press the (Phone) button to make a phone call.
2.
If the system access is successful, you will hear a dial
tone and the last number dialed will be displayed.
Notes:
• If you are out of the trunked system range or the
phone interconnect is out of service, “no
PHonE” is displayed for six seconds after trying
to access the system, and a continuous low-
pitched tone is emitted.
• If the trunked phone interconnect is in use, a
busy tone sounds and “PH buSY” is displayed.
If you hang up, you will lose your place in the
queue.
• This is a timed message. If you cannot access the
telephone system (no dial tone heard), you need
to press the
(Home) button
to hang up, and
start again from step 1 of this procedure.
19
Trunked Telephone Operation
(cont.)
To Next Page
Loading...
