Paging an ID Number at a Location in the Call
List
1. You can also Call Alert page an ID number at a
particular location in the preprogrammed call list.
2. To page an ID number from the preprogrammed call
list, press the (Call) button.
Note:
• If the radio is programmed with both Private Call
(PC) or Call Alert (CA) features, then press the call
button twice to enter the CA mode.
3. The display shows “CA” momentarily and then the
last ID number transmitted or received, or blank
display with six dashes if the last display was not
stored. You can now scroll to the ID number in the
call list.
4. The scroll button will take you forward to the
first or next member of the list; the scroll button
will take you backward to the last or previous
member of the list.
38
Call Alert™ Page Operation
(cont.)
To Next Page
Loading...
