24 Trunked Telephone Operation
(cont.)
Storing A New Phone Number (cont.)
6. The new telephone number can now be entered
from the keypad, using any of the numeric (0 – 9)
keys, as well as the “*” and “#” button. You can
also enter a pause in the telephone number by
using the button bearing the asterisk sign and
then the button bearing the pound sign.
7. The display changes to show the numbers as they
are being entered. 16 digits can be entered but
only 8 can be displayed.
Note:
•
Once you have started entering numbers, the
(Menu) button will function as a delete key.
•
When the last digit on the display has been
erased, an additional press of this key will
cause a bad key chirp.
8. After dialing the desired number, press the select
button to store the new number. The display will
first show the location number momentarily, and
then the new stored number.
Note:
•
At this point another location/s can be changed by
repeating the steps 4 through 8.
9. When you have finished phone programming/
viewing, press the (Home) button to exit.
10. The radio will return to the home display.
To Next Page
Loading...
Need help?
General
