Radio Tuning, Programming, Cloning, PassPort Tone Options and Diagnostic Functions 5-7
Search Freq-(Enter Search Frequencies): Enter the Service Menu and using the Up/Dn keys scroll to
"Search Freq". Press the Select key. Using the numeric keys and Left (P1) key for backup/delete and
the "*" key for the decimal point, enter the desired Search Frequency in MHz. Press the Select key
when the entry is complete or the Escape/Exit Key to exit the function without entering a search
frequency. After pressing the Select key the radio exits Menu mode and begins searching the entered
frequency for a period of time equal to twice the initial search delay. This utility allows a new radio or a
radio with an empty Neighbor List Almanac to search an initial frequency other than its Home
Frequency or a Seed List Frequency. This can be helpful when programming and delivering a new
radio to a customer in an area not served by a site on his Home Frequency.
Clear Almanac – (Clear Neighbor list Almanac): Enter the Service Menu and using the Up/ keys
scroll to "Clear Almanac". Press the Select key. The stored Neighbor frequencies are erased. This
utility allows clearing obsolete Neighbor frequencies collected.
To Next Page
Loading...
