4.3
IMPRES 2 Battery with Self-Calibration and
Recondition
ATTENTION: IMPRES 2 batteries that have this icon on the battery label do
not require periodic calibration and reconditioning when docked into this IM-
PRES 2 charger (with software version V2.01 or newer).
NOTE: Ensure that your charger is always updated with the latest firmware.
The Motorola Solutions Charger Reprogrammer application package can be
downloaded from Motorola Online (MOL) or the Motorola Solutions website.
4.4
End-of-Service-Life Indication
The IMPRES 2 charger may indicate IMPRES 2 battery end-of-service by alternating red and green LED
upon successful completion of calibration or reconditioning. For battery with Self-Calibration icon, the charger
may indicate the battery End-of-Service momentarily at battery insert, and continuously blinks red and green
LED upon complete charging.
When batteries are used, normal wear reduces available capacity
. IMPRES 2 chargers compare IMPRES 2
battery capacity to the battery-rated capacity. When the capacity is at a very low value, the IMPRES 2 battery
may be nearing its end-of-service. The IMPRES 2 battery remains usable. In some scenarios, it may be
preferable to deploy the battery to someone who does not require large battery capacity to complete a work
shift.
MN009418A01-AD
Chapter 4: IMPRES 2 Batteries and Chargers
14
To Next Page
Loading...
Need help?
General
