Motorola IMPRES 2 Adaptive Unit User Manual

Figure 15: Version V1.0 Analyzer Mode Menu
Analyzer Messages for
Pocket #1 on Pocket #1 Display
Back
Press OK to entr
ANALYZER MODE
Press OK to exit
ANALYZER MODE
7.2
V
ersion V1.05 Analyzer Mode
Analyzer Mode is enhanced with the release of software version V1.05. For chargers with a display on each
pocket, Analyzer information is displayed on the display adjacent to its pocket.
When browsing through Analyzer information on Pocket 1, other displays browse through Analyzer
information available for its adjacent pocket.
Figure 16: Version V1.05 Analyzer Mode Menu
Analyzer Messages on the
Display adjacent to the Pocket
Back
Press OK to entr
ANALYZER MODE
Press OK to exit
ANALYZER MODE
7.3
V
ersion V1.11.01 Analyzer Mode
Analyzer Mode is enhanced again with the release of software version V1.11.01. For chargers with a display
only on Pocket 1, the Pocket 1 Menu Display is used to display information for any other charger pocket. The
version V1.05 enhancement remains.
MN009418A01-AD
Chapter
7: Analyzer Mode
35

Motorola IMPRES 2 Adaptive Unit Specifications

General

Model	IMPRES 2 Adaptive Unit
Type	Battery Charger
Compatibility	Motorola IMPRES batteries
Voltage	7.4V
Input Voltage	100-240V AC
LED Indicators	Yes
Chemistry	Li-ion