Motorola IMPRES 2 Adaptive Unit User Manual

Chapter 12
Programming a Radio or Data Transfer
through Communication Module
Procedure:
1. T
urn on the Multi-Unit Charger (MUC) and wait for 20 seconds for the MUC to completely power up.
2. Connect the radio to the USB type C cable.
3. Insert the radio into the MUC pocket.
4. Start the Integrated Terminal Management (iTM) programming session.
NOTE: In the event of power loss to the MUC, disconnect the USB cable from the radio and
remove the radio from the MUC pocket. Perform the procedure again by following steps 1
through 4.
MN009418A01-AD
Chapter
12: Programming a Radio or Data Transfer through Communication Module
49

Motorola IMPRES 2 Adaptive Unit Specifications

General

Model	IMPRES 2 Adaptive Unit
Type	Battery Charger
Compatibility	Motorola IMPRES batteries
Voltage	7.4V
Input Voltage	100-240V AC
LED Indicators	Yes
Chemistry	Li-ion