Motorola L2 - Locking and Security

31
basics
service provider didn’t change these codes, you should
change them:
Find it: Press - > Settings > Security > New Passwords
If you forget your unlock code: At the Enter Unlock Code prompt,
try entering 1234 or the last four digits of your phone
number. If that doesn’t work, press
- and enter your 6-digit
security code instead.
If you forget other codes: If you forget your security code,
SIM PIN code or PIN2 code, contact your service provider.
lock & unlock phone
You can lock your phone to keep others from using it. To lock
or unlock your phone, you need the 4-digit unlock code.
To
manually lock your phone: Press - > Settings > Security
>
Phone Lock > Lock Now .
To
automatically lock your phone whenever you turn it off:
Press
- > Settings > Security > Phone Lock > Automatic Lock > On .
Note: You can make emergency calls on a locked phone (see
page 39). A locked phone still rings or vibrates for incoming
calls or messages,
but you need to unlock it to answer .
lock & unlock keypad
You can lock your keypad to prevent accidental key presses.
Press
-* to lock or unlock the keypad.
Note: The display backlight is dimmed when the keypad is
locked to conserve battery life.