Motorola LI4278 - Page 380

A - 2 LI4278 Product Reference Guide
Beep on Insertion (F0h 20h) Enabled 4-17
Pairing Modes Unlocked 4-20
Pairing on Contacts Enable 4-21
Connection Maintenance Interval 15 min 4-23
Page Button Disable 4-26
Authentication Disable 4-27
Variable Pin Code Static 4-28
Batch Mode (F1h 20h) Normal (Do Not Batch Data) 4-25
Encryption Disable 4-29
Secure Simple Pairing IO Capability
(SPP Server and SPP Master Host Mode Only)
No Input/No Output 4-30
User Preferences
Set Default Parameter Restore Defaults 5-4
Report Software Version N/A 5-5
Parameter Bar Code Scanning Enable 5-5
Beep After Good Decode Enable 5-6
Decode Illumination Indicator Disable 5-6
Beeper Tone Medium 5-7
Suppress Power Up Beeps Do Not Suppress 5-8
Beeper Volume High 5-8
Beeper Duration Medium 5-9
Hand-Held Trigger Mode Level 5-10
Hands-Free Mode Enable 5-11
Low Power Mode Enabled 5-12
Time Delay to Low Power Mode 100 msec 5-13
Time Delay to Presentation Sleep Mode 5 Min 5-15
Timeout to Low Power Mode from Auto Aim 15 Sec 5-17
Continuous Bar Code Read Disable 5-18
Unique Bar Code Reporting Disable 5-18
Decode Session Timeout 9.9 Sec 5-18
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.