Motorola MBP18 - Using the Baby Monitor MBP18; Setting up; Night Vision Mode; Video ON;OFF

Using the Baby Monitor MBP18 11
ENGLISH
3. Using the Baby Monitor MBP18
3.1 Setting up
• Place the baby unit in a convenient location (e.g. on a table) and point
the camera lens towards the area you want to monitor.
• Adjust the baby unit's head angle by rotating the camera up, down, left
and right until you are satisfied with the image in the parent unit.
NOTE
Do not place the baby unit within baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.2 Night Vision Mode
The baby unit has 8 high-intensity infrared LEDs for picking up clear images
in the dark. When the built-in photo sensor detects a low level of ambient
light, the LEDs will automatically activate and the screen on the parent unit
will display in black and white. The
N icon will be displayed on the screen.
3.3 Video ON/OFF
Press V VIDEO ON/OFF button to turn the LCD display on or off, but will
still leave the audio monitor on.