Motorola MBP18 - View a Camera; Delete a Camera; Scan Camera

MBP18 Parent Unit Menu Options 13
ENGLISH
4. Press and hold the PAIR button underneath the baby unit until the
parent unit finds the camera, beeps and the picture from the camera
appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.5.2 View a camera
1. Press the button and the menu bar will pop up.
2. Press the
- DOWN button to select VIEW CAMERA icon and
press the button to confirm.
3.
1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN button
to select the desired Camera unit, and press the button to view
the picture from that camera.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press repeatedly to select
Camera 1 - 4 or .
4.5.3 Delete a camera
1. Press the button and the menu bar will pop up.
2. Press the
- DOWN button to select DELETE CAMERA icon
and press the button to confirm.
3.
1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN button to
select the desired Camera unit, and press the button to delete
that registration.
NOTE
You are not allowed to delete the camera if it is the only camera paired in
the system.
4.5.4 Scan camera
1. Press the button and the menu bar will pop up.
2. Press the
- DOWN button to select VIEW CAMERA icon and
press the button to confirm.
3. The screen will then display images from different registered
cameras in a loop, changing about every 12 seconds.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press repeatedly to select
Camera 1 - 4 or .