Motorola MC45 User Manual

9 - 10 MC45 User Guide
Four Slot Battery Charger
r
MC45 is not placed
correctly in the
cradle.
Remove the MC45 from the cradle, and re-insert correctly. If the
battery still does not charge, contact customer support.
The MC45 battery charging LED slowly blinks amber when the
MC45 is correctly inserted and charging.
Ambient
temperature of the
cradle is too warm.
Move the cradle to an area where the ambient temperature is
between 0°C (32°F) and 35°C (95°F).
MC45 removed
from cradle during
communication.
Replace MC45 in cradle and retransmit.
Table 9-4 Troubleshooting the Vehicle Charge Cradle (Continued)
Symptom
Possible
Cause
Action
Table 9-5 Troubleshooting the Four Slot Battery Charger
Symptom
Possible
Cause
Action
LEDs do not light
when MC45 is
inserted.
Charger is not
receiving power.
Ensure the power cable is connected securely to both the charger
and to AC power.
MC45 battery is not
seated firmly in the
charger.
Remove and re-insert the MC45 battery into the charging well,
ensuring it is firmly seated.
MC45 battery is not
charging.
Battery was
removed from the
charger or charger
was unplugged from
AC power too soon.
Re-insert the battery in the charger or re-connect the charger’s
power supply.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Battery contacts not
connected to
charger.
Verify that the battery is seated in the charging well correctly with
the contacts facing down.
Ambient
temperature of the
cradle is too warm.
Move the charger to an area where the ambient temperature is
between 0°C (32°F) and 35°C (95°F).

Motorola MC45 Specifications

General

Brand	Motorola
Model	MC45
Category	PDA
Language	English