To Next Page

To Previous Page

Using the Phone 4 - 5

Making a Call

With the MC45, you can make a call from the phone dialer, contacts, speed dial and call history.

Using the Phone Keypad

To make a call using the phone keypad:

1. Tap Start > Phone or press .

2. Enter the phone number on the dialer or keypad. The number appears in the Call Line.

3. Tap the green Call Line or press .

4. Tap to cancel the call or tap to place the MC45 in speakerphone mode.

5. When the call connects, the name or number appears in the Call Line. To place the call on hold, press .

To return to the call, press again.

6. Tap or press to end the call.

Using Contacts

Use Contacts to make a call without looking up or entering the phone number.

To make a call from Contacts:

1. Tap Start > Contacts.

2. From the contact list, tap and hold the contact name.

NOTE You can make emergency calls even when the MC45 is locked or when a SIM card is not installed. See

Making an Emergency Call on page 4-7 for more information.

NOTE Placing a call on hold using the Call Line can be enabled. To enable, press > > Enable Hold.

The toggle icon changes to On.

Motorola MC45 User Manual

Other manuals for Motorola MC45