Motorola MC45 - Installing the Micro Secure Digital (Microsd) Card

Getting Started 1 - 3
• Install the mini-SIM card
• Install the battery.
• Charge the MC45
• Power on the MC45
• Configure the MC45.
Installing the Micro Secure Digital (microSD) Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery (see Figure
1-3). Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
To install the microSD card:
1. Slide the mini-SIM card holder to the right to unlock.
2. Lift the mini-SIM card holder.
Figure 1-3 microSD Card Installation
3. Slide the microSD card holder down to unlock.
4. Lift up the microSD card holder.
5. Insert the card with the card contacts facing down and lower the microSD card holder.
6. Slide the microSD card holder up to lock.
7. Lower the mini-SIM card holder.
8. Slide the mini-SIM card holder to the left to lock.
CAUTION Follow proper ESD precautions to avoid damaging the microSD card. Proper ESD precautions include,
but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.