How to fix a Motorola MC55 PDA that won't turn on?
If your Motorola MC55 PDA doesn't turn on when you press the power button, it could be due to a few reasons. First, ensure the battery is charged or replace it. Second, check that the battery is installed correctly. Finally, if it's a system crash, try performing a warm boot. If that doesn't work, proceed with a cold boot.
What to do if Motorola MC55 PDA does not turn on but two LEDs blink?
If you press the power button on your Motorola MC55 PDA and it doesn't turn on, but two LEDs blink, it means the battery charge is low. To resolve this, charge or replace the battery in the MC55.
How to fix Motorola MC55 PDA when it does not turn on?
If your Motorola MC55 PDA doesn't turn on when you press the power button, it might be due to several reasons. First, the battery may not be charged, so try charging or replacing it. Second, the battery might not be installed correctly; ensure it is properly installed. Finally, a system crash could be the cause. In this case, try performing a warm boot. If that doesn't work, perform a cold boot.
Why tapping icons doesn't work on Motorola MC55 PDA?
If tapping window buttons or icons on your Motorola MC55 PDA doesn't activate the feature, the screen might not be calibrated correctly. Re-calibrate the screen by pressing the Blue key - Backspace key or tap Start > Settings > System tab > Screen icon > Align Screen button. Alternatively, the system may not be responding, in which case you should warm boot the system.
Why is my Motorola MC55 PDA rechargeable battery not charging?
If your Motorola MC55 rechargeable battery isn't charging, there are a few potential causes. First, the battery might have failed and needs replacement. If replacing the battery doesn't solve the issue, try performing a warm boot, and then a cold boot. Second, make sure the MC55 remains in the cradle while charging; a full charge takes less than six hours. Lastly, extreme temperatures can prevent charging; the battery won't charge if the ambient temperature is below 0°C (32°F) or above 40°C (104°F).
Why does my Motorola MC55 PDA keep shutting off?
Your Motorola MC55 PDA might be shutting off due to inactivity. To adjust this, go to Start > Settings > System tab and tap the Power icon. Select the Advanced tab and change the setting for a longer delay before the automatic shutoff feature activates. Note that if the MC55 is running on battery power, you can set the inactive period from 1 to 5 minutes (in one-minute intervals). If it's running on external power, you can set it to 1, 2, 5, 10, 15, or 30 minutes. Alternatively, the battery may be depleted, so try replacing it. Also, ensure the battery is properly inserted.
What to do if Motorola MC55 PDA rechargeable battery did not charge?
If the rechargeable battery of your Motorola MC55 PDA isn't charging, the battery may have failed, requiring a replacement. If replacing the battery doesn't solve the issue, try performing a warm boot, and then a cold boot. Another possible cause is removing the MC55 from the cradle while the battery was charging; ensure the MC55 remains in the cradle until fully charged (less than six hours for a 3600 mAh battery). Extreme battery temperatures can also prevent charging; the battery won't charge if the ambient temperature is below 0°C (32°F) or above 40°C (104°F).
How to fix Motorola MC55 PDA when memory is full?
If you're getting a message that the Motorola MC55 PDA memory is full, it could be due to too many files stored on the device. Try deleting unused memos and records, and save important records on your host computer or use an SD card for extra memory. Another reason might be too many applications installed on the MC55. Remove any unused user-installed applications to free up memory by going to Start > Settings > System tab and tapping the Remove Programs icon. Select the program and tap Remove.
What causes data transmission problems on Motorola MC55 PDA?
If your Motorola MC55 PDA is not transmitting data or the data is incomplete during communication, it might be because the MC55 was removed from the cradle or disconnected from the host computer during communication. Ensure the MC55 remains in the cradle or the communication cable is attached, then re-transmit. Also, check for an incorrect cable configuration. Finally, the communication software might be incorrectly installed or configured; perform setup again.
What to do if Motorola MC55 PDA does not turn on but LEDs blink?
If pressing the power button on your Motorola MC55 PDA results in two blinking LEDs but the device doesn't turn on, it means the battery charge is low. You should charge or replace the battery in the MC55.
Introduces the guide for the MC55 Enterprise Digital Assistant.
Details the various hardware and software configurations of the MC55.
Provides a summary of topics covered in each chapter of the manual.
Lists other guides and resources relevant to the MC55.
Contact details and procedures for obtaining technical support and service.
Introduces the chapter on parts, accessories, and initial setup.
Instructions for removing protective material and verifying package contents.
Lists and describes various accessories available for the MC55 EDA.
Covers installing microSD, SIM, battery, and powering on the device.
Details battery charging, status checks, and replacement procedures.
Covers battery management, power, and backlight settings.
Instructions for turning wireless radios on and off.
Procedure for removing and installing the device's handstrap.
Overview of MC55 features, buttons, and basic operations.
Explains the Today screen and status icons for device information.
Details the default programs and system settings for device configuration.
Covers adjusting volume, checking battery status, and managing power settings.
Procedures for resetting the MC55 and securing the device with passwords.
Explains the different keypad configurations and data entry.
Instructions for scanning bar codes, using the camera, and capturing data.
Introduces GPS technology and its use on the MC55.
Information on installing third-party GPS navigation software.
Details system settings for configuring GPS functionality.
Guidance on acquiring satellite signals and using GPS features.
Explanation of Assisted GPS (A-GPS) modes and configuration.
Overview of MC55 phone capabilities like calls, messages, and connectivity.
Accessing the keypad, turning the phone on/off, and audio modes.
Covers making calls, using contacts, call history, speed dial, and emergency calls.
Explains call waiting, muting, taking notes, and text messaging.
Steps for establishing and ending data connections, including GPRS.
Explains Bluetooth technology, its capabilities, and supported stacks.
Covers Bluetooth security, pairing, and general configuration settings.
Details enabling, disabling, discovering, and connecting to Bluetooth devices.
Explains various services like file transfer, audio, serial ports, and synchronization.
Instructions for managing Bluetooth using the Microsoft stack.
Lists and describes various accessories that support MC55 capabilities.
How to set up and use the USB cradle for charging and synchronization.
Setup and operation of the cradle for Ethernet, modem, or USB connections.
Instructions for using the cradle to charge multiple MC55 devices.
Setup and operation of the cradle for Ethernet connectivity and charging.
Guide for installing and using the vehicle cradle for mounting and charging.
How to use the charger to charge up to four MC55 batteries.
Describes various communication and charge cables and their usage.
Instructions for installing the vehicle holder for mounting the MC55.
Covers cleaning, storing, and troubleshooting MC55 operation.
Guidelines for maintaining the MC55, including cleaning procedures and safety.
Essential safety precautions for battery usage, charging, and disposal.
Solutions for common problems with the MC55 and its accessories.
Detailed technical hardware specifications for the MC55 EDA.
Technical specifications for various MC55 accessories like cradles and cables.
Explains the Voice Quality Manager (VQM) software features.
Covers VQM capabilities, enabling, audio modes, and packet prioritization.
Procedure to disable the Voice Quality Manager software.
Introduces new features in Windows Mobile 6.5 for the MC55.
Explains finger scrolling, home screen, status bar, and tile bar functions.
Covers device locking methods, including PIN and strong password setup.
Details RS507 imager setup, Assisted GPS, and UI settings.
Definitions of terms and acronyms used throughout the manual.
General| Barcode Scanner | 1D laser scanner or 2D imager |
|---|---|
| Operating System | Windows Mobile 6.1 |
| Display | 3.5 in. QVGA color display |
| Wireless Connectivity | Wi-Fi 802.11 a/b/g, Bluetooth 2.0 |
| GPS | Optional |
| Expansion Slots | SD slot |
| Camera | Optional |
| Keyboard | QWERTY |
To Next Page
