6 - 12 MC55 User Guide
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
•
USB Charging cable
• Provide the MC55 with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC55 and a host computer. With customized or third party software,
it can also synchronize the MC55 with corporate databases.
•
Charge Only cable
• Provide the MC55 with operating and charging power when used with the Motorola approved power
supply.
•
Auto Charge cable.
• Provide the MC55 with operating and charging power when used with the Motorola approved power
supply.
Battery Charging and Operating Power
The communication/charge cables can charge the MC55 battery and supply operating power.
To charge the MC55 battery:
1. Connect the communication/charge cable power input connector to the Motorola approved power source.
2. Slide the bottom of the MC55 into the connector cup end of the communication/charge cable and gently press
in until it latches into the MC55.
3. Slide the two locking tabs up until they both lock into position.
Slow Blinking Amber Battery is charging.
Solid Amber Charging complete.
Fast Blinking Amber Charging error.
Table 6-2
Battery LED Charging Indicators (Continued)
LED Indication
To Next Page
Loading...
Need help?
General
