Motorola MC45 User Manual

3 - 4 MC45 User Guide
DataWedge
DataWedge allows the user to input captured bar code data into a text field of an application.
To enable DataWedge:
1. Tap Start > Settings > System > DataWedge.
2. Tap Basic Configuration.
3. Tap 1. Barcode input.
4. Select one of the following
a. Tap 1. SSI Scanner Driver for the laser scanner.
b. Tap 2. Camera Scanner Driver for the camera.
5. Tap 1. Enabled.
6. Tap 0. Back.
7. Tap 0. Back.
8. Tap 0. Exit.
9. Tap OK.
10. Tap the Running option to start the DataWedge prcoess. The DataWedge Status changes to Ready.
11. Tap OK.
To disable DataWedge:
1. Tap Start > Settings > System > DataWedge.
2. Tap the Running option to end the DataWedge process. The DataWedge Status changes to Stopped.
3. Tap OK.
NOTE The camera decode feature is set by default to automatically decode the bar code when read. This feature
can be programmed to display a red aiming reticle that turns green upon good decode indicating that the bar
code has been successfully decoded and to that the scan button may be released.

Motorola MC45 Specifications

General

Brand	Motorola
Model	MC45
Category	PDA
Language	English