Motorola MC9500-K Application Guide

Other manuals for Motorola MC9500-K

User Guide284 pages

Integrator Guide188 pages

Quick Start Guide2 pages

Installation Guide2 pages

• A

  Angela MarquezSep 5, 2025

  Why is my Motorola MC9500-K battery not charging?

  

  Same questionReply

  • M

    Melissa BarajasSep 5, 2025

    If the battery of your Motorola Handhelds did not charge, it could be due to the following reasons: * The battery may have failed, in which case you should replace it. * There might be no power to the cradle or cable. Ensure that power is applied to the cradle or cable. The Battery Status LED flashes amber to indicate that the MC9500-K is charging. * The MC9500-K was removed from cradle while battery was charging. Place the MC9500-K onto the cradle. The 4800 mAh battery fully charges in less than six hours. * Extreme battery temperature: Battery does not charge if ambient temperature is below 0°C (32°F) or above 40°C (104°F). * The MC9500-K might not be functioning. In this case, perform a warm boot. If the MC9500-K still does not turn on, perform a cold boot.

    

    Reply
• A

  Alexandria RileySep 7, 2025

  Why does my Motorola Handhelds MC9500-K keep shutting off?

  

  Same questionReply

  • E

    Evan JeffersonSep 7, 2025

    Your Motorola Handhelds MC9500-K might be shutting off because: * The MC9500-K is inactive: The MC9500-K turns off after a period of inactivity. If the MC9500-K is running on battery power, set this period from 1 to 5 minutes, in one-minute intervals. If the MC9500-K is running on external power, set this period to 1, 2, 5, 10, 15, or 30 minutes. Check the Power window by selecting Start > Settings > System tab and tapping the Power icon. Select the Advanced tab and change the setting for a longer delay before the automatic shutoff feature activates. * The battery is depleted: Replace the battery. * The battery is not inserted properly: Insert the battery properly.

    

    Reply
• T

  tina18Sep 8, 2025

  Why is data not transmitting correctly on my Motorola Handhelds?

  

  Same questionReply

  • K

    kellyfisherSep 8, 2025

    If no data is transmitted or the transmitted data is incomplete during data communication on your Motorola Handhelds, it may be due to: * The MC9500-K being removed from the cradle or disconnected from the host computer during communication: Replace the MC9500-K onto the cradle, or reattach the communication cable and re-transmit. * Incorrect cable configuration. See the system administrator. * Communication software was incorrectly installed or configured. Perform setup. Chapter 2, Accessories for details.

    

    Reply
• E

  eharrellSep 9, 2025

  Why does Motorola MC9500-K wake up with movement?

  

  Same questionReply

  • R

    Randy StephensSep 10, 2025

    If your Motorola Handhelds MC9500-K wakes upon movement after suspending due to inactivity, it is because IST is set to wake the device when motion is detected. Disable Wake on Motion feature in IST.

    

    Reply
• R

  reginaldgrossSep 12, 2025

  Why Motorola Handhelds MC9500-K shuts off?

  

  Same questionReply

  • M

    michellemooreSep 12, 2025

    Your Motorola Handhelds MC9500-K might be shutting off due to several reasons: * It could be inactive: The device turns off after a period of inactivity. You can adjust this period in the Power settings under Start > Settings > System tab > Power icon > Advanced tab. * The battery may be depleted: Replace the battery. * The battery might not be inserted properly: Ensure the battery is correctly inserted.

    

    Reply
• K

  Kimberly PhelpsSep 12, 2025

  Why won't my Motorola Handhelds go into suspend mode?

  

  Same questionReply

  • H

    hallstevenSep 12, 2025

    If the Motorola Handhelds MC9500-K does not go into suspend mode upon inactivity, it's possible that IST is set to keep the device from going into suspend mode if motion is detected. Disable Keep Alive on Motion feature in IST.

    

    Reply

Motorola MC9500-K Specifications

General

Operating System	Windows Mobile 6.5
Storage	1 GB Flash
Scanner	1D/2D Imager
GPS	Integrated GPS
Display	3.7 inches, 640 x 480 pixels
Processor	Marvell PXA320
Camera	3.2 MP
Battery	3600 mAh
Connectivity	Bluetooth v2.1
RAM	256 MB

Related product manuals

Motorola MC9190

10 pages

Motorola MC909X

322 pages

Motorola MC9190-G

174 pages

Motorola MC67

224 pages

Motorola MC40

166 pages

Motorola MC75A

232 pages

Motorola MC32N0

182 pages

Motorola MC3190G

2 pages

Motorola MC3100-R

2 pages

Motorola MC3100-S

2 pages

Motorola MC31XX Series

186 pages

Motorola MC2100 Series

2 pages