How to fix a Motorola Handhelds MC9500-K that does not turn on?
If your Motorola Handhelds MC9500-K doesn't turn on, it could be due to several reasons: * The battery might not be charged: Charge or replace the battery. * The battery might not be installed correctly: Ensure it is properly installed. * A system crash might have occurred: Perform a warm boot. If it still doesn't turn on, perform a cold boot.
What to do if my Motorola Handhelds MC9500-K does not turn on?
If your MC9500-K device doesn't power up, there might be a few reasons. First, ensure the battery is adequately charged or replace it if necessary. Also, verify that the battery is correctly installed. If the issue persists, try performing a warm boot. Should that fail, proceed with a cold boot to reset the system.
Why does my Motorola Handhelds MC9500-K shut off by itself?
Your Motorola MC9500-K might be shutting off due to inactivity. To adjust the inactivity timeout, go to Start > Settings > System tab, tap the Power icon, select the Advanced tab, and modify the automatic shutoff delay. Another reason might be a depleted battery, in which case you should replace it. Finally, ensure the battery is correctly inserted.
What to do if my Motorola MC9500-K Handhelds battery did not charge?
If your Motorola Handhelds MC9500-K battery isn't charging, first, check if the battery has failed and replace it if needed. Also, ensure the cradle or cable is receiving power; the Battery Status LED should flash amber while charging. Make sure the device remains in the cradle for charging; a 4800 mAh battery fully charges in under six hours. Note that extreme temperatures can prevent charging, specifically below 0°C (32°F) or above 40°C (104°F). If the device is not functioning, try a warm boot, and if that doesn't work, try a cold boot.
What to do if tapping icons doesn't work on Motorola Handhelds?
If tapping icons or buttons on your Motorola Handhelds MC9500-K isn't working, the screen might not be calibrated correctly. To recalibrate, tap Start > Settings > System tab > Screen icon > Align Screen button. If the device is unresponsive, try a warm boot.
What to do if my Motorola Handhelds MC9500-K memory is full?
If you're getting a memory full message on your Motorola Handhelds MC9500-K, try deleting unused memos and records. If more space is needed, save records to a host computer or use a microSD card. Also, remove any unnecessary user-installed applications by going to Start > Settings > System tab, tapping the Remove Programs icon, selecting the program, and tapping Remove.
How to fix Motorola MC9500-K Handhelds when no data is transmitted?
If data isn't transmitting correctly on your Motorola Handhelds MC9500-K, ensure the device remains in the cradle or the communication cable is securely attached. Then, re-transmit the data. Other causes can be incorrect cable configuration or incorrectly installed/configured communication software.
Why won't my Motorola Handhelds camera launch?
If the camera application on your Motorola Handhelds MC9500-K won't launch, it might be because the DataWedge application is running. To stop it, tap Start > Settings > System > Task Manager, select DataWedge application, and tap End Task.
What to do if Motorola MC9500-K Handhelds Battery Status LED flashes but doesn't turn on?
If the Battery Status LED flashes when you press the power button on your Motorola Handhelds MC9500-K, but the device doesn't turn on, the battery is likely low. Recharge the battery to resolve this.
How to fix no sound on Motorola Handhelds?
If there is no sound on your Motorola Handhelds MC9500-K, check the volume settings. The volume may be set too low or turned off. Adjust the volume accordingly.
General| Operating System | Windows Mobile 6.5 |
|---|---|
| Storage | 1 GB Flash |
| Scanner | 1D/2D Imager |
| GPS | Integrated GPS |
| Display | 3.7 inches, 640 x 480 pixels |
| Processor | Marvell PXA320 |
| Camera | 3.2 MP |
| Battery | 3600 mAh |
| Connectivity | Bluetooth v2.1 |
| RAM | 256 MB |
To Next Page
