2 - 32 MC9500-K Series Mobile Computer Integrator Guide
Modem Dongle
This section describes how to setup and use the MDM9000 Modem Dongle with the MC9500-K.
Figure 2-47
Modem Dongle
The Modem Dongle enables data communication between the MC9500-K and a host computer, remotely through a
telephone line, and synchronizes information between the MC9500-K and a host computer.
The following items are required for a modem connection:
•
Telephone number, IP address and DNS/WINS address information from the dial-in server administrator
•
Dial-in account on the host system, including a user ID and password
•
RJ11 or RJ12 modem cable
•
Functioning telephone jack that supports plug-in modems connected to the local telephone system
Setup of Country Codes to use the modem with the appropriate country’s telephone network.
The following items are required for communication:
•
MC9500-K
•
Modem dongle
•
Module adapter cable
•
Microsoft ActiveSync
Setup of host computer and mobile computer.
Serial Port
Line In Port
LEDs
Phone Port
To Next Page
Loading...
