Motorola MC9500-K - Four Bay Charge Only Cradle Desktop Mounting

Accessories 2 - 19
Figure 2-27 Power Connection
9. Connect a Ethernet cable to the Ethernet Port 1 connector on the back of the cradle.
10. Route the network cable to a network hub.
Figure 2-28 Ethernet Connection
11. Place cables neatly in the bracket and secure with tie wraps as required.
Four Bay Charge Only Cradle Desktop Mounting
1. Align the four slots on the back of the cradle with the four cleats on the bracket.
2. Hang the cradle on the bracket ensuring that the cradle is aligned properly.
DC Cable
AC Line Cord
Power Port
Ethernet Port 1
Ethernet Port 2
Ethernet Cable