Motorola MC9500-K - Ethernet Cradle Drivers

2 - 12 MC9500-K Series Mobile Computer Integrator Guide
Figure 2-15 Daisychaining Four Bay Ethernet Cradles
Ethernet Cradle Drivers
The MC9500-K includes Ethernet cradle drivers that initiate automatically when you place the MC9500-K in a
properly connected Four Bay Ethernet cradle. After inserting the MC9500-K, configure the Ethernet connection:
1. Tap Start > Settings > Connections tab >WiFi icon. The Configure Network Adapters window appears.
Figure 2-16 Configure Network Adapters Window
2. In the My network card connects to: drop-down list, select the appropriate connection.
3. In the Tap an adapter to modify settings: list, select USB/Ethernet Series Adapter.
Ethernet Port 1Ethernet Port 1Ethernet Port 2 Ethernet Port 2