Motorola MC9500-K - Using the Correct Telephone Line Type; Configuring the MC9500-K for the Modem

2 - 34 MC9500-K Series Mobile Computer Integrator Guide
Using the Correct Telephone Line Type
Use a standard analog telephone line, as in most households. In an office, use a line connected to a fax machine or
modem. In a hotel, request a room with a standard telephone line or data port. If necessary, check with the local
phone company or administrator to make sure you are using the right type of line before sending data.
Configuring the MC9500-K for the Modem
To create a new modem connection:
1. Connect the modem to the MC9500-K as shown in Figure 2-48 on page 2-33.
2. Tap Start > Settings > Connections tab > Connections icon.
Figure 2-49 Connections Window
3. In the Connections window, select Add a new modem connection to create a connection.
NOTE If using a phone, connect the cord from the phone to the Phone port on the modem.
Table 2-2 Modem Indicators
LED Indication
Off Modem is not properly connected to the MC9500-K ; modem is not receiving power.
Green Modem is connected to the
MC9500-K and is receiving power.
Solid Amber
MC9500-K is communicating with the host computer.