Accessories 2 - 3
Guide Cup Installation
Optional guide cups can be used with the four bay cradles to assist the user when hooking the MC9500-K onto the
cradle.
To install the guide cups:
1. Align the tabs on the guide cup with the guide slots on the universal cleat.
2. Slide the guide cup into the guide slots.
Figure 2-1
Align Guide Cup with Universal Cleat
3. Ensure that the guide cup is seated properly.
4. Using the provided screw, secure the guide cup to the cradle. Torque the screw to 2.0 kgf-cm (1.73 in-lbs.)
Power Supply KT-14000-148R Supports the Single Bay USB Cradle, Single Slot Battery
Charger and Four Slot Battery Charger.
Power Supply 50-14000-241R Supports one Four Bay cradle or up to four (4) Four Slot
Battery Chargers.
Table 2-1
MC9500-K Series Accessories (Continued)
Accessory Part Number Description
Universal Cleat
Guide Cup Tabs
Guide Slots
To Next Page
Loading...
