5 - 14 MC9500-K Mobile Computer Integrator Guide
Network Time Synchronization
The MC9596-K is configured to synchronize the clock with the time from the carrier network. Use a registry key on
the MC9596-K to disable this feature.
Using a registry editor, navigate to the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\RIL\RHA\HC25]
Create the following key:
“SyncSystemTime”=dword:00000001
where:
dword:0 = disabled
dword:1 = enabled
After setting the registry key, warm boot the MC9596-K.
Enhanced Operator Name String
The MC9596-K is enabled to download and display the name of the GSM network currently logged in to. Four
registry keys on the MC9596-K have to be edited to disable this feature.
Using a registry editor, navigate to each of the following:
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\Configurations\GSM_HC25]
Edit the following key:
“EonsEnable”=dword:1
where:
dword:0 = disabled
dword:1 = enabled (default)
Using a registry editor, navigate to each of the following:
[HKEY_LOCAL_MACHINE\Comm\Cellular\Ril]
[HKEY_LOCAL_MACHINE\Comm\Cellular\Ril\Configurations\GSM_HC25]
Edit the following key:
“EonsEnabled”=dword:1
NOTE Network Time Synchronization can interfere with Fusion AutoTime Configuration. Determine if Network Time
Synchronization or Fusion AutoTime Configuration is the preferred method for synchronizing the clock on the
MC9500-K.
Not all cellular carriers support Network Time Synchronization. Contact your service provider for more
information.
To Next Page
Loading...
