Accessories 2 - 21
Four Slot Battery Charger Desk Mount Setup
This section describes how to set up the Four Slot Battery Charger with a desk mount bracket.
1. Align the thumb screw on the charger with the screw hole in the desk mount bracket.
Figure 2-30
Connect Charger to Desk Mount Bracket
2. Connect the power supply DC line cord to the power port on the back of the charger.
3. Plug the AC line cord into the power supply.
4. Plug the AC line cord into an outlet.
Figure 2-31
Four Slot Battery Charger Power Connection
Thumb Screw
Desk Mount Bracket
To Next Page
Loading...
