Motorola MC9500-K - Four Slot Battery Charger Wall Mounting

Accessories 2 - 15
Figure 2-20 Connect DC Power Cable to Cradle
6. Place cables neatly in the bracket and secure with tie wraps as required. Ensure that all cables are within the
bracket to avoid pinching wires.
7. Align the four mounting slots on the back of the cradle with the four mounting tabs on the bracket.
Figure 2-21 Four Bay Charge Only Cradle Mounting on Bracket
8. Hang the cradle on the bracket ensuring that the cradle is aligned properly.
9. Secures the two thumb screws to hold the cradle to the bracket.
Four Slot Battery Charger Wall Mounting
Two Four Slot Battery Chargers can be mounted on a Universal Wall Mounting Bracket.
Power Port
DC Cable
Mounting Tab
Mounting Slot
Thumb Screw