5 - 10 MC9500-K Mobile Computer Integrator Guide
Figure 5-15
Voice Mail and Text Messages
Fixed Dialing
Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area code(s) specified in a Fixed Dialing
list.
1. Select Fixed Dialing and tap Get Settings.
Figure 5-16
Fixed Dialing Window
2. Select the Enable fixed dialing check box.
3. To add a number to the list, tap Menu > Add.
4. Enter the phone number or area code to restrict and tap Done.
5. Repeat steps 3 and 4 to add more numbers, and tap Done twice when complete.
6. Enter PIN2 and tap Done.
NOTE PIN2 is buffered in the MC9596 indefinitely after entry and will not be requested again until a warm boot of the
MC9596 has been performed. Should PIN2 be required, then the user must perform a warm boot of the
MC9596.
To Next Page
Loading...
