1 - 2 MC9500-K Mobile Computer Integrator Guide
Getting Started
To start using the MC9500-K for the first time:
•
Install a microSD card (optional)
•
Install the SIM card (MC9596-K and MC959B-K only)
•
Install the battery.
•
Charge the MC9500-K.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to
the documentation provided with the card for more information, and follow the manufacturer’s recommendations for
use.
To install the microSD card:
1. Remove the SD card cover using the end of the stylus.
Figure 1-1
SD Card Cover Removal
2. Slide the microSD card holder door to the left to unlock.
3. Lift microSD card holder door.
Figure 1-2
Lift SD Card Holder Door
4. Place the microSD card onto the contacts.
CAUTION Follow proper ESD precautions to avoid damaging the microSD card. Proper ESD precautions include,
but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
To Next Page
Loading...
