2 - 20 MC9500-K Series Mobile Computer Integrator Guide
3. Secures the two thumb screws to hold the cradle to the bracket.
4. Place the power supply on to the bracket.
5. Connect the AC line cord to the power supply.
6. Route the AC line cord to an outlet.
7. Connect the DC line cord to the power supply.
8. Connect the DC line cord to the power port on the cradle.
Figure 2-29
Power Connection
9. Place cables neatly in the bracket and secure with tie wraps as required.
DC Cable
AC Line Cord
Power Port
To Next Page
Loading...
