Motorola MC9500-K - Page 52

2 - 18 MC9500-K Series Mobile Computer Integrator Guide
Figure 2-26 Place Cradle onto Universal Desk Mount Bracket
2. Hang the cradle on the bracket ensuring that the cradle is aligned properly.
3. Secures the two thumb screws to hold the cradle to the bracket.
4. Place the power supply on to the bracket.
5. Connect the AC line cord to the power supply.
6. Route the AC line cord to an outlet.
7. Connect the DC line cord to the power supply.
8. Connect the DC line cord to the power port on the cradle.