Motorola MD1600 - WAN Service

User Manual
27
4.2.1.3 ETH Interface
Choose Advanced Setup > Layer2 Interface > ETH Interface, and the following
page appears. In this page, you can add or remove to configure ETH WAN
Interfaces.
C
lick Add and the following page appears.
In this page, you can select a ETH port. Click Apply/Save to save configuration.
Note:
If ETH Interface is selected, there are two WAN service types (PPPoE and
IPoE).
4
.2.2
W
AN Service
Ch
oose Advanced Setup > WAN Service, and the following page appears.
In thi
s page, you are allowed to add, remove, or edit a WAN service.