MICOM-2E-ALE Owner’s Manual
64
• When the stack is full and a new address comes in. The stack stores
up to ten addresses. The eleventh call pushes the oldest address out
of the stack.
• When an address in stack is erased from the radio panel.
To return a call to a station registered in the stack:
1. Press [CALL].
2. Press [SEND].
The page in the stack is deleted automatically. The process from this point
onward is like a regular call process.
To delete a page from the stack manually:
1. Press [ERAS].
MICOM-2E asks you to confirm your intentions.
2. Press [YES] to delete the page, [NO] to cancel the deletion.
To Next Page
Loading...
