29
Programming the Radio
MICOM-2E is already configured for use at the time of purchase.
However, at times, it is necessary to change the configuration. The
following sections relate to MICOM-2E’s Programming mode.
You can find your radio parameter and change it by pressing a
function key under the parameter name, or you can press
the scroll arrow keys to scroll through the parameters.
To enter Programming mode:
1. Press to display the Menu screen.
2. Press to scroll to the second Menu screen.
3. Press [PROG] to enter Program mode.
4. Press
mode.
[RAD] to enter Radio Programming
In this menu, you program:
• channels
• radio parameters
• radio options
The following sections explain the programming procedures in detail.
To Next Page
Loading...
