Operating Instructions
13
Using Working Modes
The following sections describe how you use the various working modes
in MICOM-2E.
Working with Channel Mode
The first menu option you see when you press is Channel mode.
Channel mode is used for choosing channels already programmed in
MICOM-2E.
To enter Channel mode:
1. Press to display the Menu screen.
2. Press [CHAN].
MICOM-2E blinks the last active channel in the display.
3. Press
to confirm your choice.
Once you are in Channel mode, the mode options appear in the LCD
display:
• BAND - toggles between upper side band (USB) and lower side band
(LSB).
• SQ - toggles the noise squelch on and off.
•
DSP - displays the Digital Signal Processing
menu. This menu includes submenus:
• CLAR - Clarity mode
To Next Page
Loading...
