Operating Instructions
23
Working in Program Mode
Program mode is the mode in which you program the parameters used
in MICOM-2E.
NOTE
Program mode is accessible only if the radio is not
locked.
To enter Program mode:
1. Press to display the Menu screen.
2. Press to scroll to the second Menu screen.
3. Press [PROG] to enter Program mode.
4. Press
mode.
[RAD] to enter Radio Programming
When you press when in any option in Program mode, you return
to the Radio Programming menu.
Refer to the chapter entitled “Programming the Radio” on page 29 for
information regarding the use of Program mode.
To Next Page
Loading...
