Motorola MICOM-2E ALE - Programming Channels; Channel Options

MICOM-2E-ALE Owner’s Manual
30
Programming Channels
When you choose the CHAN option in the Radio Programming menu,
you see a menu with the following options:
• GET - Get programmed channel
• STOR - Store channel
• ERAS - Erase programmed channel
• PWR - Tx power level
• FREQ - Frequency
• BAND - Band type
• MODE - Radio mode
• AGC - Automatic Gain Control
• BW - Band width
The use of each option is explained in the following sections.
Channel Options
The first three options, GET, STOR, and ERAS, are used for
programming channels in MICOM-2E.
GET retrieves channels already programmed in MICOM-2E. Once a
channel is programmed in MICOM-2E, it is stored with all its
parameters. Retrieving a channel retrieves all the parameters defined
for the channel.