MICOM-2E-ALE Owner’s Manual
14
• NF - Notch filter
• CLIP - Clipper
• NB - Noise Blanker
• ATTN - Attenuator On/Off
•
PWR - displays the Power Setting menu.
•
MODE - displays the Mode menu.
•
AGC - toggles the Automatic Gain Control.
•
BW - displays the Band Width menu.
•
RCLV - displays the receive level while
is pressed.
When ALE is active, three additional options appear:
• [CALL] - initiates an ALE call (see pages 58-61).
• [PAGE] - displays stacked received messages (see page 63).
• [MON] - monitors the speaker (see page 65).
To Next Page
Loading...
