Motorola MOSCAD-M - Power Supply

The MOSCAD-M Unit
30
Power Supply
The MOSCAD-M can be operated from an input of 9-30V DC. The minimum input level is
determined by the output voltage level required for the AUX/Internal radio.
The table below describes the minimum input levels for the different settings:
Output
Power
Minimum
Input Power
69
6.5 9
7.5 9
810
9 10.5
9.6 11.5
The AUX/Internal radio power is set by a jumper on the Main board. The table below
describes the different models with their default settings from the factory:
Model Output
Power
Minimum
Input Power
F4570A 9.6 11.5
F4571A 9 10.5
F4572A 9 10.5
F4573A 7.5 9
F4574A 7.5 9
F4575A 7.5 9
F4580A 9.6 11.5
F4581A 9 10.5
F4582A 9 10.5
F4583A 7.5 9
F4584A 7.5 9
F4585A 7.5 9