Motorola MOTO e4 - Connect & transfer; Bluetooth device connection; Wi-Fi and hotspot setup

Connect & transfer30
Connect & transfer
Quick start: Connect & transfer
Connect accessories, computers, networks, and more.
Find it: Swipe up > Settings
Settings screen showing options to turn on Wi-Fi and Bluetooth. Tap the search icon in the top right to search for a setting.
Tips & tricks
• Quick settings: Get to the most used settings quickly. Swipe the status bar down
with two fingers. See “Quick settings”.
• Bluetooth devices: To connect a Bluetooth headset, keyboard, or other device, tap
Bluetooth.
• Wi-Fi networks: To connect, tap Wi-Fi.
• Wi-Fi hotspot: To make your phone a hotspot, check out “Wi-Fi hotspot”.
• USB cable: You can use your phone’s micro USB port to exchange media and other
Wireless & networks
Device
Wi-Fi
Bluetooth
Data usage
Display
Adaptive brightness is ON
0 B of data used
Disabled
“Home”
Wi-Fi Calling
Settings
More
Change Wi-Fi settings.
Change Bluetooth
settings.
Can’t find a setting?
Search for it.
Lorem ipsum
files with a connected computer. To change the type of USB connection, check out
“USB cables”.
• Automatic connections: When Bluetooth or Wi-Fi power is on, your phone
automatically reconnects to available devices or networks it has used before.
• Airplane mode: Need to shut down wireless connections quickly? Swipe the status
bar down with two fingers and tap Airplane mode .
• Print: Want to print your photos, docs, or other things? Check out “Print”.
Bluetooth wireless
Turn Bluetooth power on/o
Find it: Swipe up > Settings > Bluetooth, then tap the switch to turn it on
Note: Swipe down the status bar with two fingers to quickly turn Bluetooth on or o.
Tip: To extend battery life or stop connections, turn Bluetooth o when you’re not using
it.
Connect devices
The first time you connect a Bluetooth device, follow these steps:
1 Make sure the device you are pairing with is in discoverable mode (for details, refer to
the guide that came with the device).
2 Swipe up > Settings > Bluetooth.
3 Make sure the switch is on.
4 Tap a found device to connect it (if necessary, tap PAIR or enter a passkey like
0000).
Tip: Tap to rename the device.
When the device connects, the Bluetooth connected indicator appears at the top
of the screen.
To automatically disconnect or reconnect a device (like a wireless headset) anytime,
just turn the device o or on.
Note: Using a mobile device or accessory while driving may cause distraction and may
be illegal. Always obey the laws and drive safely.