Motorola MTM800 - Receiver Tests; Transmitter Tests; Call Processing Tests; Duplex Test

6 - 4 TEST SETUP & TESTING
Receiver Tests
1. Simulate Base Station (registration)
2. RSSI Test
Transmitter Tests
1. Power Profile
2. Power Burst (Control Range)
3. Tx Burst Timing Error
4. Tx Frequency Error
5. Vector Error RMS, Peak and Residual
Call Processing Tests
1. Talk Back
2. Call to Mobile
Duplex Test
1. Digital Duplex Test (Tx)
Measurement Capabilities:
Bar chart display for Tx Power, Frequency Error, Vector Error RMS, Power Analyzer,
Spectrum Analyzer, Vector Analyzer, Vector Diagrams.
Frequency Error -/+ 100Hz
Vector Error Max 10% RMS,
Max 30% Peak,
Max 5% Residual
7. Digital Duplex
Test (Tx)
RF Gen Level Private Mode -50dBm
Burst Power 10-22dBm
Timing Error <=0.25 Symbols
Frequency
Error
-/+ 100Hz
Vector Error Max 10% RMS,
Max 30% Peak,
Max 5% Residual
Table 6-2 Test setup
No. Test Name Test Setup Terminal Setup Test Conditions Limits
6866539D31.book Page 4 Tuesday, March 20, 2007 6:32 PM