Talkgroup Folders
The talkgroups are organized in folders. You can select a talkgroup by first choosing a folder and then the talkgroup
in the folder. Use the rotary knob or the Option button to select the talkgroup, for detail procedure see the Feature
User Guide.The size of each folder is flexible and can be defined through provisioning.
The talkgroup folders are organized in a tree-structure:
• Level 1 Folders
- Placed at the root of the folder structure.
- Can contain both level 2 folders and talkgroups at the same time.
- Can contain any number of level 2 folders.
• Level 2 Folders
- Placed in level 1 folders.
- Any given level 2 folder can only be subfolder to one level 1 folder.
• Level 3 Folders
- Placed in level 2 folders.
- Any given level 3 folder can only be subfolder to level 2 folder.
Figure 4: Talkgroup Tree
The maximum of 256 folders is allowed, regardless of their level.
Note: The folder definitions cannot be changed using the radio MMI. Any talkgroup folder or subfolder
which is either empty or does not contain any programmed talkgroups is hidden in the MMI.
Talkgroup Selection
Talkgroup selection from the stored talkgroups list in the idle mode can be performed by scrolling through the list
using the scroll keys, or the rotary knob.
Talkgroup scrolling can be provisioned to scroll in a folder only, or continuously through the folders acting as one
continuous list of groups.
The radio does not allow directly dialing a group SSI.
Services and Features | 23
| | Send Feedback
To Next Page
Loading...
