Note: The terminal periodically repeats the audible and visible indication of low battery.
- In default configuration non-BSI radio in TMO displays:
+ Line 1: Network status or network identification (No Service or MCC/MNC or MCC/ MNC alias).
+ Line 2: Selected Group Folder.
+ Line 3: Selected Group.
+ Lines 4, 5: Home Mode Display Text (if available).
+ Line 5: Time and Date (if available).
Note: In case the time and date information for a specific language cannot be displayed in one
line in the zoom or standard mode, the information is displayed in two lines. The time and date
overwrite the second line of Home Mode Display if any.
• Softkey labels and optional menu icon.
• An optional wallpaper background.
From the idle display, you have an easy access to stored target lists.
• Pressing the UP key accesses the favorite talkgroups list.
• Pressing the DOWN key accesses the recent calls lists.
• Pressing the SEND key accesses the last dialed numbers list.
• Pressing the Contcs softkey accesses the address book.
Related Links
Configurable Idle Screen on page 80
Configurable Idle Screen
Your service provider can configure the information that is displayed on the idle screen below the status icon area.
Depending on the radio configuration and services supported, the following information can be displayed:
• Network alias
• Range alias
• Talkgroup alias
• Time and date
• Home mode display
• RMS/FMS
• ISSI
• Radio status
• Audio profile name
Display Features
The radio utilizes colors to highlight certain special situations:
• When the radio is in an emergency mode/call.
• When in the call-out mode (alert received state, standby state, accept the state).
• In the RUA/RUI, when you are logged on or pseudo logged on.
Note: The color display is an option. By default the radio is equipped with a grayscale display.
If the display flip is provisioned, the radio provides the ability to reverse the direction of the display. Hence, the
display can be read when holding the radio upside down.
The radio has four font size levels that you can choose using the menu.
80 | Man-Machine Interface
Send Feedback | |